Usoro ACL Igwe Ọkwa ndọta
Nchịkọta
Usoro ACL Magnetic Level Gauge na-ese n'elu mmiri dị ka ihe atụ.Ngosipụta kọlụm nchara magnetik, anaghị achọ ike.ACL dabara maka ịdị iche iche na gburugburu ebe obibi site na Obere ruo elu okpomọkụ, site na agụụ ruo elu nrụgide, nke bụ ezigbo ihe nlele ọkwa maka ụlọ ọrụ Petrochemical na wdg.
ACL nwere ike ghọta oti mkpu na njikwa oke, na-ahazi mmepụta mgba ọkụ dị elu na nke ala.
ACL nwere ike ghọta nkuzi anya, nnwale na njikwa ọkwa, na-ahazi transmitter.
Anyị na-enye akụkụ-Mounted na Top-Mounted dị ka nwụnye saịtị na akpa.
Anyị na-enye igwe anaghị agba nchara, PP plastik, igwe anaghị agba nchara teflon wdg dị ka ọkara.PP plastic na igwe anaghị agba nchara teflon dị mma maka acid na alkali corrosive media.
Njirimara nhazi
1.Basic Model
Igwe n'elu mmiri na-arị elu na ala site n'ịdị elu nke ọkwa dị na tube ihe atụ, dabere n'ụkpụrụ nke ịkwọ ụgbọ mmiri.Igwe ndọta na-adịgide adịgide na-ese n'elu mmiri na-eme mpịakọta kọlụm na-acha ọbara ọbara na nke ọcha karịa 180 ° site na mmetụta ndọta.Kọlụm na-atụgharị site na-acha ọcha na-acha uhie uhie mgbe ọkwa dị elu, n'ụzọ ọzọ, kọlụm na-atụgharị site na-acha uhie uhie gaa na-acha ọcha.Ya mere, a na-achọpụta ọkwa ọkwa.
2.Upper and Lower Limit Switch Output
Mgbanwe oti mkpu na ọnọdụ ntọala nke ọkpọkọ kwụ ọtọ na-arụ ọrụ dịka magnetik sere n'elu na-akpụ akpụ na ọkwa dị elu.N'ihi ya, ọ nwere ike ịghọta ON-OFF njikwa ma ọ bụ mkpu.
3.Electrical Remote Transmission
A na-agbanye ihe nfesa na mita ọkwa magnetik.Ihe nnyefe nwere ihe mmetụta na transducer.Ọ na-akpali elu na ala magnetik sub nha nha mmewere sochiri omume n'ime catheter site magnetik njikọ mgbochi mgbaama mgbanwe tọghata ọkọlọtọ 4 ~ 20mA nke ugbu a mgbaàmà mmepụta, nke mere na dijitalụ ngosi ngwá ọrụ ma ọ bụ kọmputa njikọ, Remote Ngosipụta.
Isi Nka na ụzụ Parameters
| Nwụnye | Agbakwasịrị n'akụkụ | Elugoro elu | ||
| Ogologo oge nwụnye | Igwe anaghị agba nchara | 500-12000mm | 500-2500mm | |
| PP | 500-4000mm | |||
| Nrụgide arụ ọrụ | 0.6, 1.6, 2.5, 4.0MPa | 0.6, 1.6, 2.5, MPa | ||
| Ọkara njupụta | ≥0.6g/cm3 | ≥0.76g/cm3 | ||
| Flange | Igwe anaghị agba nchara | 20-40 (DN20, PN4.0) (GB/T9119-2000) | 200-25 (DN200, PN2.5) (GB/T9119-2000) | |
| PP Plastic | 20-10 (DN20, PN1.0) (GB/T9119-2000) | 200-6 (DN200, PN0.6) (GB/T9119-2000) | ||
| Akụrụngwa ahụ | PP Plastic, igwe anaghị agba nchara | |||
| Okpomọkụ Ọkara | -40 ~ 80℃ 0～150℃ 0～300℃（PP Plastic -10～60℃） | |||
| Okpomọkụ gburugburu | -40 ~ 70 ℃ | |||
| Njehie egosi | ± 10mm | |||
| Viscosity Ọkara | ≤0.07Pa.S | |||
| Mmepụta mgbanwe mgbanwe elu na nke ala | Njikwa mmetụta:10mm mmepụta ike kọntaktị:AC220V0.5A Onye ntụgharị: AC220V5A Ndụ kọntaktị: 50000 | |||
| Ngosipụta na-aga n'ihu nke dịpụrụ adịpụ eletrik | Nzizi: ± 1.5％ Ibu nrụpụta: 4-20mA时 0-500Ω Mmepụta mgbaàmà: DC4-20mA, Sistemụ waya abụọ Ihe mgbawa: iaⅡCT4 Nchekwa n'ime | |||
Cheta na: 1. N'akụkụ akụkụ:
Igwe anaghị agba nchara: Oke nso = Oghere nwụnye
PP: Ngosipụta nso = Oghere nwụnye L- 150mm
2. Oghere nwụnye (nleba anya) nha: 500-5000mm (nke sitere na imewe iwu pụrụ iche ma ọ bụrụ na ọ dị ogologo karịa 5000mm)
Nlereanya
| ACL Igwe Ọkwa Igwe Ọkwa Igwe Ọkwa ACL mkpuchi mkpuchi Igwe Ọkwa Igwe Ọkwa | Njirimara nhazi | ||||||||
|
| 1 | Agbakwasịrị n'akụkụ | Nwụnye | ||||||
| 2 | Elugoro elu | ||||||||
| 1 | PP Plastic (akwa maka ≤0.6MPa) | Akụrụngwa ahụ | |||||||
| 2 | 1Cr18Ni9Ti 0Cr19Ni9(304) | ||||||||
| 3 | Igwe anaghị agba nchara PTFE | ||||||||
| 1 | 0.6MPa | Nrụgide aha | |||||||
| 2 | 2.0MPa | ||||||||
| 3 | 2.5MPa | ||||||||
| 4 | 4.0MPa | ||||||||
| 5 | Nrụgide dị elu 9.6MPa | ||||||||
| 1 | Ihe nlere anya | Ọrụ njikwa. | |||||||
| 2 | Mmepụta mgbanwe mgbanwe elu na nke ala | ||||||||
| 3 | Mbufe dịpụrụ adịpụ eletrik (4-20mAOutput, 24VDC) | ||||||||
| 4 | Ebe dị nfe dị mma (4-20 mAOput,24VDC) | ||||||||
| L | =Oghere nwụnye(Oghere a na-atụ) | Ntụ Index | |||||||
| L1 | Omimi nwụnye (N'elu-Mounted) 0-3000mm Nhọrọ | ||||||||
| Ọkara njupụta | (g/cm3) | ||||||||
| ACL- | 0 | A | 1 | 1 | L= | L1= | ρ= | Ọmụmaatụ | |
Ihe Nlereanya
ACL-1111 L=2500 ρ=0.6
Akụkụ-nkwakwasịrị, PP Plastic, 0.6MPa, Basic Model, Nwụnye Oghere (Atụ Oke): 2500mm Ọkara Njupụta: 0.6g/cm3
Ngwakọta sistemu na wiring
1.Upper na Lower mgba ọkụ mmepụta
Ihe mejupụtara ngbanwe nke ahịhịa amị na transducer na-ejigide ihe, a na-etinye ngbanwe ahịhịa na transducer n'otu n'otu na saịtị na ụlọ njikwa, ụzọ mgba ọkụ atọ (AC220V 5A).
2.Electrical Remote Transmission
Mere otu unit na transducing unit.
Uru anyị
1. Ọpụrụiche na ngalaba nha maka afọ 16
2. Na-ejikọta ọnụ na ọnụ ọgụgụ nke ụlọ ọrụ ike 500 kachasị elu
3. Banyere ANCN:
* R&D na ụlọ nrụpụta a na-arụ
* Mpaghara usoro mmepụta nke 4000 square mita
* Mpaghara sistemụ ahịa nke 600 square mita
* Mpaghara sistemu R&D nke 2000 square mita
4. Ụdị ihe mmetụta nrụgide TOP10 na China
5. 3 Ụlọ ọrụ kredit Eziokwu na ntụkwasị obi
6. National "Specialized na pụrụ iche ọhụrụ" obere ibu
7. Kwa afọ ire-eru 300,000 nkeji Ngwaahịa na-ere n'ụwa nile
Ụlọ ọrụ mmepụta ihe
Asambodo anyi
Asambodo akaebe mgbawa
Asambodo patent
Nkwado nhazi
Ọ bụrụ na ụdị ngwaahịa na paramita arụmọrụ nwere ihe pụrụ iche chọrọ, ụlọ ọrụ ahụ na-enye nhazi.
